| Customization: | Available |
|---|---|
| Application: | Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate, Transformer and Printed Circuit |
| Color: | Yellow, Golden |
|
Still deciding? Get samples of US$ 0/piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
6051 Polyimide Film
| Number | Index | Unit | Standard |
| 1 | Density | g/cm3 | ≥1.4 |
| 2 | Tensile Strength | MPa | ≥100 |
| 3 | Breakdown Voltage | KV/mm | ≥30 |
| 4 | Elongation | % | ≥25 |
| 5 | Volume Resistivity | ΩM/CM | 1x107 |
| 6 | Heat shrinkage rate | % | Less than 3.5-2.0 |
| 7 | Dielectric strength | V/um | ≥100(2o+/-5C) |
| Number | Index | Unit | Standard |
| 1 | Density | g/cm3 | ≥1.4 |
| 2 | Tensile Strength | MPa | ≥100 |
| 3 | Breakdown Voltage | KV/mm | ≥30 |
| 4 | Elongation | % | ≥25 |
| 5 | Volume Resistivity | ΩM/CM | 1x107 |
| 6 | Heat shrinkage rate | % | Less than 3.5-2.0 |
| 7 | Dielectric strength | V/UM | ≥100(20+/-5°C) |
| Property Name (Название свойста) | H Type Film (Пленка тип Н) | |||||||||
| Appearance (Наружный вид) | Transparent or semi-transparent golden film with smooth and flat surface and without any needle cavities, bubbles or electrically conductive impurities. (Прозрачная или полупрозрачная золотистая пленка с гладкой ровной поверхностью без проколов, вздутий, электропроводящих включений.) | |||||||||
| Thickness Nominal(um) (Номинальная толщина) | 20.0 | 25.0 | 30.0 | 40.0 | 50.0 | 75.0 | 100.0 | 125.0 | 150.0 | 175.0 |
| Thickness Tolerance(um) (Допуск толщины) | ±3.0 | ±3.0 | ±3.0 | ±4.0 | ±5.0 | ±7.5 | ±10 | ±12.5 | ±15.0 | ±17.5 |
| Width (mm) (Ширина) | 6-1040 | 6-520 | ||||||||
| Length(m) (Длина) | 1000±5 | 500±5 | 300±5 | 200±5 | ||||||
| Tensile Strength MPa ≥ (Прочность на растяжение) | 140 | 120 | ||||||||
| Elongation at Rupture % ≥ (Удлинение при разрыве) | 40 | 60 | ||||||||
| Dielectric Strength MV/m ≥ (Диэлектрическая прочность) | 150 | 120 | ||||||||
| Surface Resistivity Ω.cm ≥ (Поверхностное удельное сопротивление) | 1.0x1013 | |||||||||
| Volume resistivity Ω ≥ (Объемное удельное сопротивление) | 1.0x1015 | |||||||||
| Dielectric Constant (106H) (Диэлектрический коэффициент) | 3~4 | |||||||||
| Dielectric Tangent(106H) ≤ (Диэлектрический тангенс) | 1.0x10-3 | |||||||||
){kind=link}