Diamond Dotted DDP Fexible Laimate Insulation Thermal Paper

• Customization: Available
• Application: Motor, Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation
• Color: Brown
• Model NO.: DDP
• Material: Paper
• Maximum Voltage: 20KV~100KV
• Thermal Rating: B 130
• Thickness: 0.08mm, 0.13mm, 0.15mm, 0.17mm, 0.20mm, 0.25mm
• Width: 960mm, 1000mm
• Package: Pallet
• Water Content: 4.0%-8.0%
• Type: Insulation Paper
• Chemistry: Inorganic Insulation
• Classification: Inorganic Insulation Material
• Certification: ISO9001
• Brand: Chr
• Transport Package: Pallet
• Specification: 0.08-0.25x960mm
• Trademark: CHR
• Origin: China
• HS Code: 4811601000
• Production Capacity: 20mt/Week

Product Description

Product Description

Diamond dotted insulation paper is made of electrical insulating paper coated with heat curable epoxy resin, the epoxy adhesive is applied to both sides of the paper in a diamond pattern consisting of 9.5mm x 9.5mm diamonds with 15.9mm center spacing It is a kind of material with inertia, dry and no conglutination at normal temperature (below 30 degree C). The Diamond Dotted Paper will make the electric conductor forever felt up as a hard unit under the high temperature by its internal latency substance. when the temperature is rising up to 90 degree C. The Diamond Paper begins one-off thaw and then one-off solidification .When to keep the temperature at 90 degree C for 90 minutes, the epoxy resin would paste on neighboring cable and paper safely. The felt intensity is as high as to 70psi at 100 degree C (The value at least is equal to 0.275Mpa, America standard)
 

Product Parameters

Type: Insulation Paper
Thickness: 0.08mm, 0.13mm, 0.15mm, 0.17mm, 0.20mm, 0.25mm
Width: 960mm, 1000mm
Color: Natural
Insulation Class: Class B (130ºC)

 

Our Advantages

1. Kraft paper, 100% sulfate pulp
2. High purity and mechanical strength
3. Baked enamel coating: Epoxy resin, rhombic, one or both sides
4. Good compatibility with liquid dielectric after the baked enamel coating has hardened.
5. Care should be taken that the layers to be baked remain closely pressed against each other during baking time

 

Applications

It is to be used in oil-immersed transformers for the insulation between coils. On the insulation layer, there is a layer dotted  epoxy resin that will be changed with high-temperature change that is to be called as felt.
 

Specifications

 

Item	Index		Unit	Standard
1	Thickness &tolerance		mm	0.08±0.005 0.13±0.007 0.18±0.010 0.20±0.010 0.25±0.010
2	Density		g/cm^3	0.85~1.10
3	Adhensive thickness of single side		μm	10~15
4	Water content		%	4.0~8.0
5	Oil absorbency		%	≥20
6	Adhensive strength	Ordinary state	kPa	≥650
		100ºC±2ºC		≥400
7	Pollution for transformer oil		-	Pollution-free(tan∮<0.001)

 

N0	Index		Unit	Standard
1	Thickness &tolerance		mm	0.08±0.005 0.13±0.007 0.18±0.010 0.20±0.010 0.25±0.010
2	Density		g/cm^3	0.85~1.10
3	Adhensive thickness of single side		μm	10~15
4	Water content		%	4.0~8.0
5	Oil absorbency		%	≥20
6	Adhensive strength	Ordinary state	kPa	≥650
		100ºC±2ºC		≥400
7	Pollution for transformer oil		-	Pollution-free(tan∮<0.001)
8	Tensile strength	MD	N/10mm width	≥60	≥110	≥160	≥180	≥230
		CD		≥30	≥50	≥70	≥80	≥100
9	Tear Index	MD	Mn	≥450	≥900	≥1350	≥1500	≥2000
		CD		≥500	≥1000	≥1500	≥1700	≥2300
10	Breakdown	In air	KV	≥0.88	≥1.37	≥2.00	≥2.10	≥2.25
		In oil		≥4.40	≥7.00	≥9.00	≥9.80	≥11.50